Beston BLJ-3 Plastic Pyrolysis Plant Shipped To South Africa

Beston BLJ-3 pyrolysis plant was shipped to South Africa on January 19th and is expected to arrive in the port on February 13th. The client from South Africa wants to process waste plastic into pyrolysis oil used as fuel oil. Beston pyrolysis plants can turn not only plastic but also waste tire and oil sludge into fuel oil and steel.
BLJ-3-Plastic-Pyrolysis-Plant

Project Information Of BLJ-3 Plastic Pyrolysis Plant Shipment

  • Location: South Africa
  • Raw material: Waste plastic
  • End products: Pyrolysis oil;carbon black
  • Products usage: pyrolysis oil used as fuel oil
  • Model&Capacity: BLJ-3; 0.5-1ton/d
  • Work method: Batch

BLJ-3-Plastic-Pyrolysis-Plant-3
BLJ-3-Plastic-Pyrolysis-Plant-2
BLJ-3-Plastic-Pyrolysis-Plant-1

Beston Group has extensive experience in manufacturing pyrolysis plants in the world. There are various kinds of pyrolysis plants in Beston, including batch, skid-mounted, semi-continuous, and fully continuous. The customer from South Africa chose a batch pyrolysis plant which was easy to install and operate. In the process of communication with the customer, we provide him with a satisfactory solution and perfect service according to his requirements so that he chose Beston finally without hesitation. If you have the same requirements, please contact us for more details.

    Contact Us

    Please fill in the form below and submit your inquiry. We will reply to you within 2 hours.

    Please specify your requirement by referring to the following aspects:

    1. What kind of waste do you hope to recycle currently? (Key Point)

    2. What kind of final product do you hope to get? And for what usage? (Key info for further discuss)

    3. What capacity are you looking for? (Customized design support for equipment)

    4. Which project stage are you currently in? Pre-research or comparison and evaluation? (Key info for project management)

    5. What else do you hope to enquiry from Beston? (Customized service from our project consultant)

    * Your Message:

    Beston BST-05pro Skid-Mounted Charcoal Making Machine Shipped To India

    Beston BST-05Pro skid-mounted charcoal making machine has shipped to India in January and arrived in India in January. The client from India knew Beston Group through the website and believed in Beston’s technology and service. Beston Group has always been customer-centric, and our goal is to make customers successful.

    Project Information Of BST-05Pro Shipped To India

    • Location:India
    • Date of shipment: On January 10th
    • Model/Capacity: BST-05pro 150-200kg/h/set
    • Raw material: Gound nutshell, Cotton Stalk, Juli Flora chips(moisture:<15%,size:<2cm)
    • End product: Coconut Shell Charcoal

    BST-05pro-Charcoal-Making-Machine-1
    BST-05pro-Charcoal-Making-Machine-To-2

    The Shipment Video Of BST-05pro Charcoal Making Machine

    The first set of Beston BST-05pro skid-mounted charcoal making machines has shipped to India successfully, and another three sets of equipment will also be shipped according to the schedule. Beston carbonization equipment can process not only biomass waste but also sewage sludge into charcoal, vinegar, and tar. If you have such requirements, please contact us and we will give you satisfactory solutions.

    Good Feedback of The Client From India

    Importantly, we have received the customer’s good feedback. He thinks highly of Beston’s charcoal making machine and is satisfied with our service.We are also very grateful to our customers for their trust in us.
    BST-05pro-feedback

      Contact Us

      Please fill in the form below and submit your inquiry. We will reply to you within 2 hours.

      Please specify your requirement by referring to the following aspects:

      1. What kind of waste do you hope to recycle currently? (Key Point)

      2. What kind of final product do you hope to get? And for what usage? (Key info for further discuss)

      3. What capacity are you looking for? (Customized design support for equipment)

      4. Which project stage are you currently in? Pre-research or comparison and evaluation? (Key info for project management)

      5. What else do you hope to enquiry from Beston? (Customized service from our project consultant)

      * Your Message:

      BTF-1-3 Egg Tray Machine Shipped To Congo

      Glad to share Beston’s egg tray making machine latest case with you. Beston BTF-1-3 egg tray machine has shipped to Congo smoothly and it is expected to arrive at Congo at the end of February. The customer from Congo buys the egg tray machine to process waste paper into egg trays, which is very eco-friendly and cost-effective.
      BTF-1-3-Egg-Tray-Machine

      Detailed Information Of Egg Tray Machine To Congo

      • Location: Congo
      • Date of shipment: at the end of February
      • Model/Capacity: BTF-1-3(800-1000pcs/h)
      • Raw material: waste paper
      • End products: egg tray(30 pieces)
      • Drying method: dry naturally under the sun
      • Product usage: egg tray for sale

      BTF-1-3-Egg-Tray-Machine-1
      BTF-1-3-Egg-Tray-Machine-3
      BTF-1-3-Egg-Tray-Machine-2

      BTF-1-3-Egg-Tray-Machine-4
      BTF-1-3-Egg-Tray-Machine-5
      BTF-1-3-Egg-Tray-Machine-6

      Trial Run Video Of BTF-1-3 Egg Tray Machine To Congo


      After the production of the equipment, we will carry out operational tests to ensure that the equipment is qualified and then shipped. The customer search Beston Group through other clients’ introduction. Besides, he knew Beston Group which was a trustworthy company before. That is because Beston always takes the customer as the center, pays attention to the customer’s needs, and provides the customer with satisfactory service. Most importantly, Beston Group pays special attention to the quality of the product, and the process of production of the equipment is controlled at all levels.

        Contact Us

        Please fill in the form below and submit your inquiry. We will reply to you within 2 hours.

        Please specify your requirement by referring to the following aspects:

        1. What kind of waste do you hope to recycle currently? (Key Point)

        2. What kind of final product do you hope to get? And for what usage? (Key info for further discuss)

        3. What capacity are you looking for? (Customized design support for equipment)

        4. Which project stage are you currently in? Pre-research or comparison and evaluation? (Key info for project management)

        5. What else do you hope to enquiry from Beston? (Customized service from our project consultant)

        * Your Message:

        BLJ-3 Tyre Pyrolysis Plant Shipped To Indonesia

        Beston BLJ-3 tyre pyrolysis plant has been delivered to Indonesia on December 23rd. The whole process of shipment is going well and both of us hope that the equipment will reach Indonesia successfully.
        BLJ-3-Batch-Pyrolysis-Plant-Shipped-To-Indonesia

        Project Information Of BLJ-3 Tyre Pyrolysis Plant Shipment

        • Location: Indonesia
        • Raw material: Shredded tire rubber pieces(external purchase)
        • End products: Pyrolysis oil;carbon black
        • Products usage: pyrolysis oil used as fuel oil
        • Model&Capacity: BLJ-3; 2-3 t/d

        BLJ-3-Batch-Pyrolysis-Plant-Indonesia-5
        BLJ-3-Batch-Pyrolysis-Plant-Indonesia-1
        BLJ-3-Batch-Pyrolysis-Plant-Indonesia-2

        BLJ-3-Batch-Pyrolysis-Plant-Indonesia-3
        BLJ-3-Batch-Pyrolysis-Plant-Indonesia-4
        BLJ-3-Batch-Pyrolysis-Plant-Indonesia-6

        The customer wants to have their own tire pyrolysis oil plant and produce tire oil for their own use. He wanted to buy a small model and Beston initially recommended the BLJ-6 model, but finally, he reduced the budget and purchased our BLJ-3 model. When the customer asks about the way and requirements of feed, we give them detailed answers and provide him with a satisfactory solution with a reduced budget.

        The Delivery Video Of BLJ-3 Tyre Pyrolysis Plant To Indoneisa

        Positive Testimonials From The Customer From Indonesia

        After determining the purchase solution, the client sent us a positive review. The client recognized our professionalism, service, and brand and gave us high praise. Beston Group always focuses on the customer’s needs. If you have the same requirements, contact us quickly, and we will provide you with satisfactory service!
        BLJ-3-Batch-Pyrolysis-Plant-Fdb

          Contact Us

          Please fill in the form below and submit your inquiry. We will reply to you within 2 hours.

          Please specify your requirement by referring to the following aspects:

          1. What kind of waste do you hope to recycle currently? (Key Point)

          2. What kind of final product do you hope to get? And for what usage? (Key info for further discuss)

          3. What capacity are you looking for? (Customized design support for equipment)

          4. Which project stage are you currently in? Pre-research or comparison and evaluation? (Key info for project management)

          5. What else do you hope to enquiry from Beston? (Customized service from our project consultant)

          * Your Message:

          BST-10 BBQ Charcoal Making Machine Shipped To Finland

          Beston BST-10 BBQ Charcoal Making Machine has been shipped to Finland and is expected to arrive at the end of January. The whole process of shipment is going well and we hope that the equipment can reach Finland smoothly.
          BST-10-BBQ-Charcoal-Making-Machine-finland

          Project Information Of BST-10 BBQ Charcoal Making Machine

          • Model/Capacity: BST-10 1ton/hour
          • Raw material: Wood Chips(Local acquisition)
          • Location: Finland
          • Date of shipment: At the end of January
          • Required end products: less than 2cm, Moisture 50% or less
          • End product: BBQ Charcoal;
          • Products usage: BBQ charcooal

          BST-10-Charcoal-Making-Machine-1
          BST-10-Charcoal-Making-Machine-5
          BST-10-Charcoal-Making-Machine-3

          BST-10-Charcoal-Making-Machine-4
          BST-10-Charcoal-Making-Machine-2
          BST-10-Charcoal-Making-Machine-6

          Why Choose Beston?

          The customer from Finland searched Beston Group on the website. Beston Group is known for its technology, service and quality. Besides, we have exported to more than 100 countries. The customer knew the carbonization equipment cases in Europe and the machine quality and appearance are good. What’s more, after repeated comparisons we provided him with a satisfactory solution, and the customer finally chose us with confidence. If you have such requirements and believe Beston Group, please contact us for more solutions.

          The Shipment Video Of BBQ BST-10 Carbonization Equipment

          Beston procurement engineers are meticulous in the process of purchasing equipment and materials, and strictly control quality issues. After the equipment was completed, the technical engineer checked the condition of the equipment to ensure it was correct and then loaded the truck for shipment to Finland on December 13, 2022. It is expected to arrive at the end of January.

            Contact Us

            Please fill in the form below and submit your inquiry. We will reply to you within 2 hours.

            Please specify your requirement by referring to the following aspects:

            1. What kind of waste do you hope to recycle currently? (Key Point)

            2. What kind of final product do you hope to get? And for what usage? (Key info for further discuss)

            3. What capacity are you looking for? (Customized design support for equipment)

            4. Which project stage are you currently in? Pre-research or comparison and evaluation? (Key info for project management)

            5. What else do you hope to enquiry from Beston? (Customized service from our project consultant)

            * Your Message: