Continuous Pyrolysis Plant

Beston’s fully continuous pyrolysis plant can convert waste tires, rubber, plastics, and sludge into oil. BLL-30 fully continuous pyrolysis plant not only has a large output but also has high stability and safety. In addition, the fully continuous pyrolysis plant can continuously feed and discharge materials, so the uninterrupted operation mode not only saves time but also saves labor costs. The following are the parameters of the fully continuous pyrolysis equipment for your reference:
BLL-30 Continuous Pyrolysis Plant

Raw MaterialsWaste Plastic, Tyre, Rubber, Oil Sludge
Daily Capacity20-30T
Working MethodFully Continuous
Reactor SizeD1.8m*L18.5m
PatternHorizontal & Rotary
Heating MaterialsFuel Oil, Natural Gas, LPG, etc.
Total Power256kw/h
Installation Area Requst (L*W*H)70m*20m*10m
Operating PressureSlight Negative Pressure
Cooling MethodWater Cooling
Life span5-8 Years

get a free quote

Processable Raw Materials & Oil Yield of Beston Pyrolysis Plant

  • Waste tires: oil yield of 30%-50%, including machinery tires, bicycle tires, motorbike tires and other tires;
  • Waste rubber: oil yield of 20%-40%, including waste cable sheaths, rubber shoe soles, rubber gloves, etc.;
  • Sludge oil: oil yield of 20%-50%, including oil mud, oil sludge, etc.;
  • Waste plastics: waste acrylic (PMMA), PE, PP, etc.
Waste Tyres
waste rubber
Waste Rubber
oil sludge
Oil Sludge
waste plastics
Waste Plastics

End Products of Beston Pyrolysis Plant

non-standard oil
Pyrolysis Oil
1. Sold directly as fuel to steel mills, boiler plants, construction machinery, etc.
2. Burn it as fuel to generate electricity.
3. After purification, it can be made into high-quality fuel oil, which can be mixed with standard diesel for use in machinery, large trucks, ships, and so on.
Carbon Black
1. Mix coal to make the coal pellets, which can be burned as fuel.
2. Mix building materials to make bricks and asphalt modifiers.
3. After processing, can be used as a rubber reinforcement agent, to produce new rubber products.
1. After packaging, direct sales to steel processing enterprises.
2. To produce steel bars and rods in the steel-making factory.
Combustible Gas
Combustible Gas
Used for pyrolysis process heating.

Beston Continuous Pyrolysis Plant Case

The BLL-30 fully continuous pyrolysis plant has been sold to many countries and has been well received by customers. Therefore, if you want to carry out a large output pyrolysis project. Please choose Beston Group.

Beston BLL-30 Fully Continuous Pyrolysis Plant Was Installed in Romania

Beston’s fully continuous pyrolysis plant has been successfully installed in Romania and has been put into use. Beston’s product quality and service are well received and favored by customers.

BLL-30 Continuous Pyrolysis Plant to Romania

BLL-30 Fully Continuous Pyrolysis Plant to Romania
BLL-30 fully Continuous Plant to Romania
BLL-30 Pyrolysis Plant to Romania

Features and Advantages of This Pyrolysis Plant

Safety design

The feeding system of the fully continuous production line is designed with a nitrogen seal to isolate the air and the PLC control system is designed with a temperature and pressure safety threshold alarm system.

The high degree of automation

Automatic screw water-cooling discharge system, high degree of automation, sealed and safe, more clean and environmentally friendly, with low labor intensity for workers.

Three in one condensing system

Three-in-one condenser design, integrating oil tank, condensing, and water seal into one, easy to install, small footprint, space-saving.

Meet different needs

The models are diversified, which can meet the customer’s daily processing capacity of 0.5 tons to hundreds of tons, and can meet the needs of different stages from the feasibility of the customer test project to the large-scale commercial plan.

System supporting catalyst

The catalysts can be carried out according to the requirements of customers for processing raw materials. The use of special catalysts for plastic pyrolysis developed by our company can effectively improve the yield and quality of fuel oil.

Environmental protection, high quality

Adopt screw automatic feeding system, fully enclosed design, and equipped with system safety configuration, passed CE, ISO, SGS certification, low loss, and low failure rate.

Beston Services


24/7 Online Support services

24 hours online to answer customers’ various questions about products; provide customers with necessary business plans before sales, and strictly control product quality and track shipments during sales.


Professional Service Team

Professional after-sales service team, with a total of more than 60 after-sales personnel responsible for the installation, commissioning, trial operation, and acceptance of the equipment purchased by customers, as well as technical training for local personnel;

System After-sales Tracking

Perfect customer follow-up system, collect customer feedback, solve problems in time. Provide 1-year after-sales service free of charge. During this period, Beston will provide you with free maintenance services and free replacement of unqualified parts

    Get In Touch
    Please Feel Free To Give Your Inquiry In The Form.
    Please specify your requirement by referring to the following aspects:
    1-What kind of solution will meet your demand? (Key point)
    2-What kind of material and expected end product are you planning to have? (Right solution begins from material and product)
    3-When is the project supposed to be running? (Key info for A-Z project programming)
    4-Budget for machinery purchasing? (Key info for right model)
    5-Points that you really focus on. (Customized service from our project consultant)